Day 1 – Regulations and risks at sea
Morning – Authorisations and airspace
You’ll review which shipboard flights are permitted under a ‘specific’ category operational authorisation (EU 2019/947). Using the SORA method, you’ll assess ground risk to people on passing vessels and air risk near helicopter routes and helidecks. You’ll also discuss permits to work and coordination with the bridge team, the Netherlands Coastguard and wind farm operators.
Afternoon – Vessel motion and navigation
You’ll explore how turbulence behind the superstructure and the vessel’s pitch, roll and heave affect your approach to the deck. You’ll learn how steel can interfere with the compass and how reflected satellite signals can distort the drone’s reported position (GNSS multipath). You’ll practise standard marine VHF calls and finish with a theory test.
Day 2 – Technical preparation and flight planning
Morning – Preparing the drone
You’ll review compass and IMU calibration and the limitations of obstacle sensors over water. As the vessel moves, the original launch point may be left well astern. You’ll explore how Return to Home (RTH) works with a dynamic home point and how the drone responds if the control link is lost. You’ll also fit a flotation kit and check the drone’s weight and centre of gravity.
Afternoon – Planning an offshore inspection
One possible exercise is to plan a wind turbine inspection. You’ll draw up a flight plan, assign roles to the pilot, visual observer and deck crew, and brief the master. A simulator exercise may cover ATTI mode, in which the pilot compensates for wind drift. Hand launches and catches may be rehearsed where the operations manual permits them.
Day 3 – Practical training on board
During the toolbox talk, you’ll assign roles and agree who will keep the deck clear. After the pre-flight checks, the master and remote pilot make the go/no-go decision together. You’ll take off from a vessel under way, inspect a buoy or quay wall, and land on the moving deck.
You’ll respond to simulated loss of satellite navigation and of the control link. During a ditching drill, you’ll rehearse an emergency landing on water and practise recovering the drone. The day concludes with post-flight maintenance, a debrief and a practical assessment.